Building gem5

This chapter covers the details of how to set up a gem5 developmment environment and build gem5.

Todo

Add a pointer to the gem5 docker image. In fact, we may want to have a docker image for each section.

Requirements for gem5

See gem5 requirements for more details.

  1. hg (Mercurial):

    The gem5 project uses Mercurial for version control. Mercurial is a distributed version control system (like git). It uses simple commands that should be familiar to svn users as well. More information about Mercurial can be found by following the link. Mercurial should be installed by default on most platforms. However, to install Mercurial in Ubuntu use

    sudo apt-get install mercurial
    
  2. gcc 4.6+

    You may need to use environment variables to point to a non-default version of gcc. For CSL machines, you can add the following to your .bashrc.local, assuming you’re using bash as your shell.

    export PATH=/s/gcc-4.7.3/bin:$PATH
    export LD_LIBRARY_PATH=/s/gcc-4.7.3/lib64:$LD_LIBRARY_PATH
    

    On Ubuntu, you can install a development environment with

    sudo apt-get install build-essential
    
  3. SCons

    gem5 uses SCons as its build environment. SCons is like make on steroids and uses Python scripts for all aspects of the build process. This allows for a very flexible (if slow) build system.

    To get SCons on Ubuntu use

    sudo apt-get install scons
    
  4. Python 2.5+

    gem5 relies on the Python development libraries. On CSL machines, you may experience errors with the default Python version (2.5). To use version 2.7 you can add the following to your .bashrc.local:

    export PATH=/s/python-2.7.3/bin:$PATH
    export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/s/python-2.7.3/lib
    export LIBRARY_PATH=/s/python-2.7.3/lib:$LIBRARY_PATH
    

    To install these on Ubuntu use

    sudo apt-get install python-dev
    
  5. SWIG 2.0.4+

    SWIG is a set of scripts and libraries that wraps C++ objects and exports them to scripting languages, like Python. gem5 uses SWIG to export C++ SimObjects to the Python configuration files.

    To install SWIG on Ubuntu use

    sudo apt-get install swig
    

    On CSL machines, you can use swig found in /s:

    export PATH=/s/swig-2.0.6/bin/:$PATH
    

    You may have to install SWIG manually. In that case, you can download the source from http://www.swig.org/download.html. Version 2.0.4 is known to work with gem5. Then, unpack, build, and install:

    tar -xvzf swig-2.0.4.tar.gz
    ./configure --prefix=<PATH INSTALL SWIG. e.g., ~/local>
    make && make install
    
  6. protobuf 2.1+

    “Protocol buffers are a language-neutral, platform-neutral extensible mechanism for serializing structured data.” In gem5, the protobuf library is used for trace generation and playback. protobuf is not a required package, unless you plan on using it for trace generation and playback.

    sudo apt-get install libprotobuf-dev python-protobuf protobuf-compiler libgoogle-perftools-dev
    

Getting the code

Change directories to where you want to download the gem5 source. Then, to clone the repository, use the hg clone command.

hg clone http://repo.gem5.org/gem5-stable

You can now change directories to gem5 which contains all of the gem5 code.

Your first gem5 build

Let’s start by building a basic x86 system. Currently, you must compile gem5 separately for every ISA that you want to simulate. Additionally, if using ruby, you have to have separate compilations for every cache coherence protocol.

To build gem5, we will use SCons. SCons uses the SConstruct file (gem5/SConstruct) to set up a number of variables and then uses the SConscript file in every subdirectory to find and compile all of the gem5 source.

SCons automatically creates a gem5/build directory when first executed. In this directory you’ll find the files generated by SCons, the compiler, etc. There will be a separate directory for each set of options (ISA and cache coherence protocol) that you use to compile gem5.

There are a number of default compilations options in the build_opts directory. These files specify the parameters passed to SCons when initially building gem5. We’ll use the X86 defaults and specify that we want to compile all of the CPU models.

scons CPU_MODELS="AtomicSimpleCPU,MinorCPU,O3CPU,TimingSimpleCPU" build/X86/gem5.opt -j9

The main argument passed to SCons is what you want to build, build/X86/gem5.opt. In this case, we are building gem5.opt (an optimized binary with debug symbols). We want to build gem5 in the directory build/X86. Since this directory currently doesn’t exist, SCons will look in build_opts to find the default parameters for X86. (Note: I’m using -j9 here to execute the build on 9 of my 8 cores on my machine. You should choose an appropriate number for your machine, usually cores+1.)

The output should look something like below:

scons: Reading SConscript files ...
Mercurial libraries cannot be found, ignoring style hook.  If
you are a gem5 developer, please fix this and run the style
hook. It is important.

Checking for leading underscore in global variables...(cached) no
Checking for C header file Python.h... (cached) yes
Checking for C library pthread... (cached) yes
Checking for C library dl... (cached) yes
Checking for C library util... (cached) yes
Checking for C library m... (cached) yes
Checking for C library python2.7... (cached) yes
Checking for accept(0,0,0) in C++ library None... (cached) yes
Checking for zlibVersion() in C++ library z... (cached) yes
Checking for GOOGLE_PROTOBUF_VERIFY_VERSION in C++ library protobuf... (cached) yes
Checking for clock_nanosleep(0,0,NULL,NULL) in C library None... (cached) no
Checking for clock_nanosleep(0,0,NULL,NULL) in C library rt... (cached) yes
Checking for timer_create(CLOCK_MONOTONIC, NULL, NULL) in C library None... (cached) yes
Checking for C library tcmalloc... (cached) yes
Checking for C header file fenv.h... (cached) yes
Checking for C header file linux/kvm.h... (cached) yes
Checking size of struct kvm_xsave ... (cached) yes
Checking for member exclude_host in struct perf_event_attr...(cached) yes
Building in /afs/cs.wisc.edu/p/multifacet/users/powerjg/gem5-tutorial/gem5/build/X86
Variables file /afs/cs.wisc.edu/p/multifacet/users/powerjg/gem5-tutorial/gem5/build/variables/X86 not found,
  using defaults in /afs/cs.wisc.edu/p/multifacet/users/powerjg/gem5-tutorial/gem5/build_opts/X86
scons: done reading SConscript files.
scons: Building targets ...
 [ISA DESC] X86/arch/x86/isa/main.isa -> generated/inc.d
 [NEW DEPS] X86/arch/x86/generated/inc.d -> x86-deps
 [ENVIRONS] x86-deps -> x86-environs
 [     CXX] X86/sim/main.cc -> .o
 ....
 .... <lots of output>
 ....
 [   SHCXX] drampower/src/MemoryPowerModel.cc -> .os
 [   SHCXX] drampower/src/MemorySpecification.cc -> .os
 [   SHCXX] drampower/src/Parameter.cc -> .os
 [   SHCXX] drampower/src/Parametrisable.cc -> .os
 [   SHCXX] drampower/src/libdrampower/LibDRAMPower.cc -> .os
 [      AR]  -> drampower/libdrampower.a
 [  RANLIB]  -> drampower/libdrampower.a
 [     CXX] X86/base/date.cc -> .o
 [    LINK]  -> X86/gem5.opt
scons: done building targets.

When compilation is finished you should have a working gem5 executable at build/X86/gem5.opt. The compilation can take a very long time, often 15 minutes or more, especially if you are compiling on a remote file system like AFS or NFS.

Common errors

Wrong gcc version

Error: gcc version 4.6 or newer required.
       Installed version: 4.4.7

Update your environment variables to point to the right gcc version, or install a more up to date version of gcc. See Requirements for gem5.

Wrong SWIG version

Error: SWIG version 2.0.4 or newer required.
       Installed version: 1.3.40

Update your environment variables to point to the right SWIG version, or install a more up to date version of SWIG. See Requirements for gem5.

Python in a non-default location

If you use a non-default version of Python, (e.g., version 2.7 when 2.5 is your default), there may be problems when using SCons to build gem5. RHEL6 version of SCons uses a hardcoded location for Python, which causes the issue. gem5 often builds successfully in this case, but may not be able to run. Below is one possible error you may see when you run gem5.

Traceback (most recent call last):
  File "........../gem5-stable/src/python/importer.py", line 93, in <module>
    sys.meta_path.append(importer)
TypeError: 'dict' object is not callable

To fix this, you can force SCons to use your environment’s Python version by running python `which scons` build/X86/gem5.opt instead of scons build/X86/gem5.opt. More information on this can be found on the gem5 wiki about non-default Python locations: Using a non-default Python installation.

M4 macro processor not installed

If the M4 macro processor isn’t installed you’ll see an error similar to this:

...
Checking for member exclude_host in struct perf_event_attr...yes
Error: Can't find version of M4 macro processor.  Please install M4 and try again.

Just installing the M4 macro package may not solve this issue. You may nee to also install all of the autoconf tools. On Ubuntu, you can use the following command.

sudo apt-get install automake